This website uses cookies to ensure you get the best experience on our website. Learn more

World’s Largest Lighter Restoration ASMR

x
  • World’s Largest Lighter Restoration ASMR

    18:47

    Five months ago, i found this Gigantic Jumbo lighter at flea market , was in a bucket with other rusty stuff .
    The seller made me a good offer and i bought it for $9. This is 5 times larger than aZippo lighter.
    As you can see is very rusted and damaged and to restore i used some simple techniques.
    First i started with disassembling the lighter. The shaft for the flint was destroyed but the other parts where ok.
    I sandblasted the big parts and the smaller parts i cleaned them on my mini thumbler with some sand and Rust remover mc51.
    On the insert i applied cold bluing to make it black.The case was electro nickelated and polished.After assembling i made a cool loking Phoenix bird on both side.
    I hope you like my work!
    Subscribe for More cool video!
    My others lighters restorations!
    Zippo Lighter -
    Huge Lighter -
    BUY FROM USA! Use my promo code :
    More cool videos to watch!
    - I Turned this Knife in to a Piece of Art (24K GOLD) - With EPOXY Restoration -

  • x
  • Huge Bismuth Lighter Restoration - ASMR

    18:26

    This is World's firts Lighter covered in bismuth.
    I hope You like it!
    This restoration took me one week.
    If you like it please Subscribe!


    Subscribe to my new Cooking channel : cooking with tysy -

    Follow me on Instagram

    For videos in advance Become my Patreon on

    DO YOU WANT STICKERS?
    Subscribe to my others channels Here / TysyTube Unboxing
    TysyTube 2.0

  • x
  • Zippo Lighter Restoration, Vietnam War MEDIC Repair - Ba Ria 72-73

    12:15

    Zippo lighter restoration from The Vietnam war Ba Ria Post year 1972-1973. Today I restore and repair an awesome lighter from Vietnam with a Red Cross combat MEDIC badge attached to is.

    This Zippo lighter is a metal detector ground found from Ba Ria-Vung Tau Province in Vietnam. It has been partially buried in mud and sand when he found it. It was sent to me by one of my metal detector friends from Vietnam.

    SUPPORT MY CHANNEL
    GET THE AWESOME T-SHIRT THAT I WEAR IN THE VIDEO ➡️

    RESTORATION PROCESS
    I always start with WD40 rust remover. Just to loosen things up. The inner case was stuck in the zippo bottom case as usual, so I was forced to use fire and a hammer to loosen those two parts from each other. I washed inner/outer case in soap and alcohol and found some beautiful inscriptions on the lighter.

    The inside case was damaged, so I had to repair it with a little heat treatment. I used the home-made mini tumbler (as usual) to clean the small parts. I cleaned the inside lighter case in the sandblaster with low air pressure and I used white virgin aluminium oxide.

    I heat treated the inside Zippo case to achieve a beautiful brown Matt army color. I polished the case and lid to mirror blank and added the Red Cross combat medic badge.

    INSCRIPTION ON THE LIGHTER
    The inscription on the lighter is
    VIETNAM BA RIA 72-73
    WAR STOP PEOPLE
    SO WHY DON’T
    PEOPLE STOP WAR

    Please subscribe if you want to see more cool upcoming restoration projects ???? And DON’T FORGET TO SEE the Vietnamese army gun oil bottle restoration:

    Thanks for watching my restoration video. See you soon.
    Music: From YouTube free audio library.

    Best wishes Martin

  • EXTREMELY Rare Lighter Restoration, World War 2 - D-day 1944!

    11:15

    Restoration of a VERY RARE LIGHTER from world war II. This is a Normandy beach area metal detector ground found, with a special emblem attached to it. See me restore this war relic into a beautiful shiny working piece of history.

    ABOUT THE RARE LIGHTER
    This is a EXTREMELY rare and special war relic probably from the World war 2. The lighter was very worn out before the restoration. According to the donator it was found near the coast of the Utah beach in Normandy France with metal detector equipment. This is one of the beaches where the allies landed the coast at D-day June 6. 1944 – So my guess is that it has been in the ground since the days around D-day 1944.

    THE RESTORATION PROCESS
    I started by cleaning the emblem who was attached to the lighter. I was VERY surprised when I saw how cool this emblem looked. I guess it is an old US marine emblem from world war 1 or 2 but I am not sure. I heated the lighter to remove all the parts which were soldered to the lighter and there after I removed all tiny parts. They were very hard to remove. I guess the many years on Normandy beach in France has been harsh to it.

    I sandblasted the brass body and grinded the whole lighter with 500, 1000 and 1500 grit. I polished it to mirror blank and added all the small part again.

    The beautiful US marine emblem was cleaned in vinegar before it was attached to the lighter again. This is such a beautiful war relic and I hope that you enjoy this restoration video.

    Please subscribe if you want to see more cool upcoming projects ???? And DON’T FORGET TO SEE my Vietnam War Zippo Lighter Restoration -

    Thanks for watching my channel. See you soon.
    Best wishes and stay safe ❤ Martin

    Music: From YouTube free audio library. And from payed license at EnvatoElements.

  • x
  • World’s Largest Lighter!

    8:13

    These every day items were scaled to unthinkable sizes, and we react to the most impressive ones we found!

    SUBSCRIBE TO THESE CHANNELS OR ELSE

    BrainfooTV


    LABikeCult


    Nick Uhas


    Bikes and Beards


    Woodward


    PeterSripol



    I did a thing


    Roger Bush


    Mark Rober


    How Ridiculous



    Inside Edition


    BrainfooTV


    CNET


    Vat19


    Stratolaunch


    The King of Random


    Michael Pick




    SUBSCRIBE OR YOU'LL HAVE BAD LUCK

    New Merch -
    ----------------------------------------------------------------
    follow all of these or i will kick you
    • Facebook -
    • Twitter -
    • Instagram -
    --------------------------------------------------------------------

  • I used $10,000 worth of equipment to restore $10 old lighter

    17:21

    Zippo Lighter Restoration - Making a Wooden and Epoxy Lighter Case. In this video I restored an old Zippo lighter and made a case for this Zippo, out of wood and Epoxy resin.
    This zippo lighter is quite old. I bought it for restoration from a person who found it with the metal detector on a beach. This zippo is made of brass and the sea water created a beautiful patina but if I had not restored it now, it would most likely have been destroyed in a short time.

    The restoration of the zippo lighter was not difficult because I used original parts for repair. But after I finished restoring I thought of making a wooden and Epoxy resin case. I have never seen this project anywhere so I had to make my own plan. For the case I used curly Koa wood. I will leave you a link at the end of the description. It was quite difficult to mill the slot where the lighter had to go.

    I tried in this restoration process to film the steps that I followed quite simply to understand by you, but if you have questions about the restoration, I am at your disposal in the comments category.

    Also, during the restoration I used subtitles about the process and solutions used. If you notice grammatical errors, I apologize in advance. English is not my native language and I am doing my best to improve it.

    I put a lot of passion and effort into this restoration. Although I was afraid of the results of the case, I am proud of how it came out and I really like it. I hope you like the restoration and the construction of that case.
    That's all for this project, enjoy watching and I have to focus for the next restoration.
    The following link belongs to the person from whom I got the wood. Is a seller on the Etsy platform, a serious seller who has quality wood at good prices :
    Cheers to all and stay safe during this times...

    #zippo #zippolighter #zippolighterrestoration

  • x
  • Lighter Restoration - Fooled at the Flea Market

    11:07

    Lighter Restoration - Found it Rusty in Belarus. In this restoration video I chose to restore a rusty lighter, found by a family member in a market in Belarus.
    The lighter is not Zippo but it looks and works on the same principle. Was chosen for restoration because I found it interesting, as rusty as it was with the Soviet inscriptions on it. Some parts of this lighter was in good condition but overall need a small restoration. Many details about it I don't have but maybe someone who watch this video can comment about.
    This restoration video took me 5 days for working and another 2 for editing. I hope you like it and if you appreciate what I do, please leave a comment, like or even become a subscriber of this channel.
    Also, this lighter cost me 2 euro but the final result is invaluable.

    Subscribe here :

    Thank you for watching and don't forget to subscribe!

  • Cleaver Restoration Black Cleaver With Ebony Handle

    18:18

    New Project, new technique! I used a new technique again in the restoration of this rusty cleaver. With iron (III) chloride and coffee I blackened the rusty cleaver. I made the new handle out of ebony, which now revealed a completely black cleaver. Restoring the old cleaver required me to drill, sand, file, remove rust and glue. I found this old hand tool again on a flea market website and really wanted to have it.

    ▬ What did I do ?! ▬▬▬▬▬▬▬▬

    The cleaver was extremely rusty, so I used rust remover and a screwdriver to remove the rough rust. I used electrolysis to remove the remaining rust. I then used an angle grinder to make the rough contour and on the belt grinder. I ground down the sides until no pitting was visible, up to a grit of 1000. Using a jig and a grindstone, I resharpened the cleaver. Now I dipped the old hand tool in iron (III) chloride and coffee. The new wooden handle is made of ebony. Now all that was left was to assemble everything and the black cleaver was ready.

    ▬ Good to know ▬▬▬▬▬▬▬▬

    I used the following tools: screwdriver, wire brush, rust remover spray, hacksaw, magnetic bowl, lab power supply, sodium hydrogen carbonate, pencil, ruler, angle grinder, cordless screwdriver, drill, belt sander, orbital sander, sandpaper, grindstone, chisel, instant coffee, two component glue, steel wool

    ▬ Do you want to support me? ▬▬▬▬▬▬▬▬

    Would you like to become a channel member? Then you can do it here:



    You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:

    or use the following affiliate links:

    Material for work:

    Rust Remover Spray:
    Step Drill:
    Sandpaper - different grit:
    Laboratory power supply:
    Sodium hydrogen carbonate:
    Grinding stone:
    Chisel:
    Iron(III) chloride:
    Two components glue:

    Equipment:

    „Camera“:
    Ring lamp:
    Microphone Rode:

    Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.

    ▬ Did you like it? ▬▬▬▬▬▬▬▬

    Did you like the video? Then like, subscribe and please share it!

    Many Thanks!

  • Rare Lighter Restoration - World War 1 Trench Build

    10:09

    Very rare lighter restoration from World War 1. This time I do a full restoration and repair of a very special and old lighter that was built by a soldier fighting in WW1 in the trenches of Britannia, France.

    I got this rare lighter from the family to restore (they want to be total anonymous), the lighter was delivered to them along with his remains during WW1, he was wounded in battle but survived but shortly after unluckily he died of influenza along with thousands of others soldiers.

    I don’t think that we can even imagine what life was in those trenches. A true HELL.

    This lighter hasn’t been touched since then. For 120 years to be exact. That gives me chills and performance anxiety. So, I do restore this lighter with the biggest respect and doing the best I can, constantly thinking not to overdo the restoration. (I’m known for that) ????

    The person who sent me this lighter has seen the lighter and the video before uploading it here on YouTube, and she was VERY satisfied with the result of this Restoration Video.
    This is my second lighter restoration - and it was a good but a bit nervous experience. You can see me shake a bit on my hand in some of the videos closeups.

    I did no magic tricks around this lighter. I added 2 brass screws to support the brazed ring around the trigger (the brazing was really bad), you may have to forgive me for that, but I think that this fits this lighter really good ????

    I really liked the outcome of this lighter restoration. I’m so lucky that I was given this opportunity and of course given this special World War lighter a new life.

    If you enjoyed my video too, please like and comment. That will mean a lot to me!

    Please subscribe if you want to see more cool upcoming restoration projects ???? I have more exciting projects coming up!

    Please also see my Zippo lighter restoration from Vietnam War:

    Thanks for watching my videos. See you next week.
    Warmest regards
    Martin

    Thanks to: Twin Musicom
    Hero's Theme by Twin Musicom is licensed under a Creative Commons Attribution license (
    Source:
    Artist:
    Found under: YouTube Creative Commons license free music

  • x
  • 5 Awesome Lighters You Didnt Know Existed!

    12:58

    $1700 Survival Kit in a Case Unboxing -

    Subscribe to:
    2nd channel -
    instagram
    facebook -

    DON'T TRY THIS AT HOME!

    Business email: crh.inquire@gmail.com

    FAN MAIL:
    CRAZY RUSSIAN HACKER
    P.O. Box 49
    Waynesville, NC 28786

  • Zippo lighter restoration - Vietnam War repair Long Bin 1967-68

    10:33

    Zippo lighter restoration from the Vietnam War Long Binh post. This time I do a full restoration and repair of a very dirty and rusty Zippo lighter that was sent to me to restore.

    I actually don’t know anything about this lighter because the person who send it was anonymous, but I assume that part of it is real.

    The Zippo lighters outer case seems real enough and was way more damaged and elder looking than the inner part. There was a very vague Zippo brand name in the bottom lighter case with serial number PAT 2517181 (Maybe the 8 is a 0?)

    The inner part of the Zippo was surprisingly shiny, after getting some wd-40 rust remover, considering it should be over 50 years old.

    If you know anything about this Zippo, if it’s a fake Vietnam war lighter or the real deal then please leave a comment below. I really like to know. Thanks.

    The inscription on the lighter was
    VIETNAM LONG BINH 67-68
    WE HAVE DONE SO MUCH FOR SO LONG WITH SO LITTLE THAT WE NOW CAN DO ANYTHING WITH NOTHING FOREVER

    I enjoyed doing this restoration video and it was my first time doing a lighter repair – and it was a good experience. I know I used some homemade incorrect parts assembling the lighter, you may have to forgive me for that ????

    I really liked the outcome of this restoration. This Zippo ended up way more beautiful and shiny than I expected. So, it’s definitely a keeper.

    If you enjoyed my video too, please like and comment. That will mean a lot to me!

    Please subscribe if you want to see more cool upcoming restoration projects ????

    Please also see me turn an antique machete into a beautiful Japanese kitchen knife:

    Thanks for watching my videos. See you next week.
    Warmest regards
    Martin

  • Zippo Lighter Restoration SEXY lady special edition

    12:38

    Restoration of a very sexy Zippo Lighter with a motive of a beautiful lady attached to it. Today I restore a relatively new lighter with a hot lady motive on.

    This zippo lighter is not very old. One of my lovely subscribers on YouTube sent it to me to restore. I accepted the challenge and thought it would be fun to do something different.

    Restoration Process
    This restoration was straight forward. And yes, I started with a little squeeze of WD40 rust remover I separated all the parts and cleaned them all with the methods that I found necessary for this restoration using fire, alcohol and coloured soap. I sandblasted the sexy lady metal motive but unfortunately, I accidentally broke the metal plate when dropping it on the floor. I was forced to come up with a quick solution and managed to get one of the very sexy lady figures from the original Zippo lighter lady edition.

    I cleaned the zippo lighter to perfection and polished it to super mirror blank. I dry brushed the new lady’s hair with Honey gold model color as a contrast to the grey metal color she has. It was a cool restoration video to do and my last video from this location. Next video will be captured in my new awesome playground.

    Please subscribe if you want to see more cool upcoming restoration projects ???? And DON’T FORGET TO SEE my WW2 Rare hip flask restoration video:

    Thanks for watching my channel. See you soon.
    Best wishes and stay safe ❤ Martin

    Music: From YouTube free audio library. And from paid licence at EnvatoElements.

  • Zippo Lighter Restoration - Marlboro Edition

    12:29

    - $5 Broken SPACE INVADER Console Restoration and Testing -
    - I Turned this Knife in to a Piece of Art (24K GOLD) - With EPOXY Restoration -
    - $1 Vintage Car Horn - NOT WORTH RESTORING - ASMR Restoration -
    - Broken Level Restoration - With Epoxy Resin -
    - Antique Rusty Saw Epoxy Handle Restoration -
    - Rusty Hand Cranked Grinder -
    - Rusty and Broken Bench Grinder -
    - Vintage Door Lock -

    In this video i'm restoring a Broken Old and Rusty Zippo Lighter Cowboy Man Edition made in USA in 1995.
    This Restoration took me 4 days to complete.
    I like so much this Zippo Lighter and will be next to my other restoration for display on my shelf.

    I hope you like my work and my video.
    Subscribe for more cool videos. I'm uploading videos about old stuff restoration.

    Huge Thank you to all my Patreon and Paypall Supporters!

    Time and costs of this restoration:
    I was working on this project for 4 days
    $0 broken zippo from a friend
    $8 zippo parts


    My Camera:
    Canon G7x Mark 2 -
    My new Camera Canon G7x Mark 3 -
    Rode VIDEOMIC NTG -



    If you want to help me create more cool videos you can support me on Patreon or Paypall

    Instagram
    PayPall
    Patreon
    Facebook

    Amazon affiliate links
    Gold leaf -
    Wood disk carving -
    Black Magic Bluing Solution -
    SandBlaster -
    Gloves -
    Sandblaster media -
    Ring light -
    Second studio light -
    Camer -
    Polishing wheel -
    Huge Lighter video -
    Cristal clear resin -
    LordsWorld - 25 Kilogrammes A1 Asilikos Universal Sand for sandblasting -
    zippo parts -

    #Zippo
    #Lighter
    #Restoration

  • Extremely Rusty and Destroyed Guillotine Restoration - ASMR

    25:35

    This is a traditional Gigantic Bread Slicer Restoration.
    This slicer was utilized in France in a bakery to cut the baguette in half .
    Subscribe if You like it! Thank You

    Follow me on Instagram @tysytube
    Become my Patreon on tysytuberestoration
    DO YOU WANT STICKERS?

    Here is the video where My Mechanics made me a new handle - Thank You My Mechanics!

  • Zippo Lighter Restoration from the Vietnam War - Đa krông 73-74

    9:38

    Zippo lighter restoration from The Vietnam War Đa krông Post 1973-1974 with soldiers AWESOME hidden massage engraved in to it. Today I restore and repair an awesome lighter from Vietnam with a US Army Airborne Paratrooper Jump Wings Badge attached to is.

    This Zippo lighter is a ground found from Đa krông in the Quảng Trị Province in the North Central Coast region of Vietnam. It was sent to me to restore from one of my friends in Asia.

    GET THE AWESOME T-SHIRT THAT I WEAR IN THE VIDEO ➡️

    RESTORATION PROCESS
    I used a little squeeze of WD40 rust remover to loosen things up. The inner case was stuck in the zippo bottom case, so I used my new custom tool to loosen those two parts from each other. I washed the inner and outer case in soapwater. Some Beautiful hand engraved inscriptions showed up on the lighter. I cleaned the inside lighter case in the sandblaster with low air pressure and I used white virgin aluminum oxide.

    I heat treated the Zippo inner case to achieve a beautiful brown matt army color. I added the classic peace sign with my laser engraving machine. I also polished the case and lid to mirror blank. Finally I cleaned the Army Airborne Paratrooper Jump Wings decal in 12% vinegar and gave it a nice antique silver plating. I attached it to the Zippo with modern glue…sorry.

    HIDDEN MESSAGE ON THE LIGHTER
    VIETNAM DA KRONG 73-74
    WHEN I DIE BURY
    ME FACE DOWN
    SO THE WHOLE WORLD
    CAN KISS MY **

    Please subscribe if you want to see more cool upcoming restoration projects ???? And DON’T FORGET TO SEE my Antique hatchet restoration:

    Thanks for watching my restoration video. See you soon, Cheers Martin

    Music: From YouTube free audio library. And from payed license at EnvatoElements.

  • Extremely Rare Lighter Restoration - Soviet Union Era

    11:40

    I restored a rusty and rare Soviet Union lighter. This antique lighter had a lot of rust and broken parts, but with some tlc and time this extremely rare lighter is restored to its former self.

    Does anyone know what it say's on the inscription?

    If you have something you would like me to restore send me an email at business@lostandrestored.com

    Watch Next:
    Rusty WW2 Pocket Knife - U.S.S Wasp Restoration


    Rusty Antique Lock Restoration - Awesome Restoration


    Old Rusty Knife Restoration - An Awesome Outcome


    Rusty Antique Hunting Knife - Surprise KA-BAR Restoration


    Rusty Vietnam War Pilot Knife Restoration


    Antique Rusty Kukri Knife Restoration (khukri)


    Very Rare Musical Lighter Restoration...Japanese 1960's!


    Make sure to Subscribe and hit that Bell Notification to see the next Lost & Restored video!

    Subscribe:

    We love restoring vintage odds and ends. What antique do you want to see Restored?

    #lostandrestored

  • Restoration Rare Vintage Lighter - SCORPION Edition Zippo style

    15:53

    Vintage Lighter Restoration.
    Hello. in this video i'll see restoration of an unusual lighter.
    My friend found it in the mud.

    Thank you for watching.
    I hope you like my work and the video.

    #Restoration #Lighter #ASMR #Mechanic

    Music:
    Song: Journey To The Stars
    Artist: Savfk
    Video link:

  • Rare Pistol Lighter Restoration - IMCO 6900

    15:47

    Restoration of rusty gun shaped pistol lighter. I will restore this cool looking cigarette pistol lighter and make it work again.

    Huge thanks to W2M industries for always loaning me their laser cleaner, if you are interested in buying one you can contact them from:

    ABOUT THE LIGHTER:
    This lighter was manufactured by austrian manufacturer IMCO. It was made around the 1960's. The model of the lighter is 6900 gunlite. This is not a firearm but the design is inspired by a small pistol. I bought this lighter from ebay for $10 which may seem a lot but these sell for much higher prices in good condition because they are very collectable and the company eventually stopped manufacturing lighter in 2012 and the brand was aquired by Japanese company Windmill.

    ABOUT THE RESTORATION:
    The disassembly is quite simple. Only the wheel and other parts held in place by the pin that goes through it need a little effort to remove. I used a precision drill to remove the pin. There is only one screw and the other parts just snap on in this great design.

    I used a laser cleaning machine to remove the rust. It uses a high power laser to burn the rust, paint and other dirt off the surface without damaging the metal like many other methods. Only downside is these devices are more expensive than e.g. a sandblaster.

    Next I polished the metal by sanding from 400 grits up to 2000 grits and polished it with metal polish compound. The polished metal was cleaned. The pieces were put into an acid activation bath for few minutes. This allows the metal to be plated in the plating solution. Next the parts were put into an electroless plating bath which plates the parts with nickel to protect them from rusting in the future. Electroless plating has number of advantages over electroplating which uses electricity to force the plating. These include more even plating even from inside of the parts. The downside it that it's more complicated and expensive method so it need much more understanding of the chemistry to have a robust plating system.

    Also the handles were polished with plastic polishing compound. The lighter was then assembled and the drilled pin was replaced.

    I hope you enjoy the video as much as I enjoyed making it. Thanks for watching!

    The following links are affiliate links. By clicking them you are directed to a amazon (or other) product page. If you purchase that or any other product I will get a small fee but you will not pay any extra. This is an easy way to support this channel and allow me to keep making these videos Thank you for watching and reading!
    ---------------------------------------------------------------------
    Patreon:
    T-Shirts:
    Instagram:

    Laser cleaner:

    Some of my tools:
    Precision drill:
    Black gloves:
    Multi-purpose Lubricant:
    Metal polishing kit:

    ---------------------------------------------------------------------
    SUBSCRIBE ▶▶▶
    ---------------------------------------------------------------------
    Restoration playlist▶
    ---------------------------------------------------------------------

    #restoration
    #repair
    #lighter

  • ZIPPO style LIGHTER RESTORATION.

    13:34

    If you liked this video ???? consider buying me a coffee ☕ ☕ I Really appreciate ????
    Zippo Restoration video. This week i Restore a Zippo style Lighter that was found on the ground in the beach, it was extremely rusted. It´s a Jiantai brand lucky stone edition. This lighter restoration took me about a week, one of the most time demanding part was due to the missing lucky stone so I had to make a new one.
    I enjoy very much restoring old things and i am very happy with the result of this restoration and I hope you enjoy restoration videos as much as I do. if so please remember to give a thumbs up and if you have something to say or ask about this restoration project please feel free to comment.
    #handsonrestoring #lighterrestoration #zippo

    Music from: Youtube Audio Library
    I hope you enjoyed this restoration as much as I did.
    Greetings
    Miguel

  • BADLY BROKEN Lighter Restoration - India Elephant Rescue

    12:52

    Restoration of a BADLY BROKEN elephant cigarette lighter from India in a very poor condition. I will do my best to rescue this indian beauty and bring this spectacular animal back to its best form.

    A subscriber from India sent me this very damaged cigarette lighter from his hometown New Delhi. He was so kind also to send me an elephant statue of Lord Ganesha or Ganesh – a very worshiped Hindu god. Its very fine and will now be a true friend at my new Awesome Playground.

    Restoration Process
    I started by wondering if I really could restore this lighter. It was old and the elephant part was made of thin pewter with several holes. Anybody who has worked with thin pewter and trying to repair holes in thin pewter knows it is a NIGHTMARE. You need heat to fix it, but too much heat and it will all melt down. I had to repair 2 holes and I also created a new leg and attached it to the elephant.

    The lighter part was made of cheap and thin mixed metal it looked like brass but it wasn’t. So yes, it’s not as easy as doing a Zippo lighter restoration. But here we go! AWESOME as I am ????

    I started by separating the lighter part from the elephant part – I did use a bit of heat but easy job. I choose to use baking soda when doing the sandblasting part because I think that regular sand would have gone thru the thin pewter and would have vanished to many details away from the elephant.
    After that I did the pewter casting job to repair the holes. I started by filling the elephant with special casting sand and casted the two holes with success. I protected the surrounding area with clay. I also casted a new leg for the Indian beauty. I used a lot of time hammering and grinding to get it right and to get the new leg to fit in on the old animal.

    The lighter part was an easy fix. The metal was just so poor that I didn’t separate anything. I just cleaned it as it was in my mini tumbler. I added a new flint stone and a new lighter spring, a new wick and added some new cotton balls. I filled it with Zippo lighter petrol, and I ignited, and it worked very well.

    It was a cool restoration video to make and and my first item from India that I have ever restored. Hopefully more to come. ❤

    Please subscribe if you want to see more cool upcoming restoration projects ???? And DON’T FORGET TO SEE my WW2 Rare hip flask restoration video:
    Thanks for watching my channel. See you soon.
    Best wishes and stay safe ❤ Martin

  • x
  • Rare WW2 Navy Lighter Restoration

    9:06

    I restore a rusty ww2 Navy Rope Lighter. This rope lighter is a unique piece of history. I hope you enjoy watching this naval lighter from ww2 return to its former glory.

    If you have something you would like me to restore send me an email at business@lostandrestored.com

    Watch Next:
    Rusty 1900's Knife Restoration - Awesome Dagger


    Extremely Rare Lighter Restoration - Soviet Union Era


    Rusty WW2 Pocket Knife - U.S.S Wasp Restoration


    Rusty Antique Lock Restoration - Awesome Restoration


    Rusty Antique Hunting Knife - Surprise KA-BAR Restoration


    Rusty Vietnam War Pilot Knife Restoration


    Make sure to Subscribe and hit that Bell Notification to see the next Lost & Restored video!

    Subscribe:

    We love restoring vintage odds and ends. What antique do you want to see Restored?

    #lostandrestored

  • Lighter Restoration - Fooled at the Flea Market

    11:07

    Hi guys!)
    Lighter Rebuilding - Found it Corroded in Belarus. In this reclamation video I chose to reestablish a corroded lighter, found by a family part in a showcase in Belarus. The lighter isn't Zippo but it looks and works on the same guideline. Was chosen for reclamation since I found it interesting, as corroded because it was with the Soviet engravings on it. A few parts of this lighter was in great condition but by and large require a little rebuilding. Numerous subtle elements almost it I do not have but perhaps somebody who observe this video can comment about. This reclamation video took me 5 days for working and another 2 for altering. I trust you like it and on the off chance that you appreciate what I do, if it's not too much trouble take off a comment, like or indeed gotten to be a endorser of this channel. Also, this lighter fetched me 2 euro but the ultimate result is priceless.
    Help me reach 1K subscribers by clicking that subscribe button!
    If you want more scale experiments - write in the comments and like the video!)

  • Antique Rusty Knife Restoration

    9:31

    Restoring a rusty knife I found in the ground, in the place where my grandpa's house used to be. The house stood there for more than 100 years, so this knife must be really old, and it shows.
    There was little metal under all that rust, so I decided to make it into a small wood carving knife.
    The wooden beam was part of grandpa's house, so I thought it was a nice touch to use it as the handle for this restoration.

  • Zippo Lighter Restoration Forgotten Michael Jackson

    14:57

    Zippo Lighter Restoration Forgotten Michael Jackson
    Welcome to World Restoration
    My mission is to restore all the old things, rust, antiques and lots of things worth doing:-)
    And of course I really love to do that:))
    I will share a new restoration 2 times per month, So please subscribe to my channel to make sure you don't miss anything.
    Thanks for all your support and watching, I really appreciate it
    Best regards, ^-^

  • Yellowed Keyboard Restoration - Windows 95 Retrobright - ASMR

    11:13

    On this video i show you how i restored this Yellowed Keyboard made for Windows 95.
    This Keyboard was set to me by Sendico .

    Subscribe if You like it!
    Thank You for watching my video!

    Follow me on Instagram
    Become my Patreon on
    DO YOU WANT STICKERS?
    Subscribe to my others channels Here / TysyTube Unboxing
    TysyTube 2.0

  • Zippo Lighter Restoration Forgotten From The Vietnam War

    19:11

    Zippo Lighter Restoration Forgotten From The Vietnam War
    #Restoration #ZippoLighter
    Vietnam War Zippo Restoration
    Today I will be rehabilitating something quite special. It was a lighter I collected from the Vietnam War. It is imprinted with the history of the Vietnam war. Please watch all the videos to see how great it is !!!
    Welcome to World Restoration
    My mission is to restore all the old things, rust, antiques and lots of things worth doing:-)
    And of course I really love to do that:))
    I will share a new restoration 2 times per month, So please subscribe to my channel to make sure you don't miss anything.
    Thanks for all your support and watching, I really appreciate it
    Best regards, ^-^

  • Restoration of a Vietnam War Zippo Lighter - Bong Son 68-69 Military Lighter

    18:03

    This time I´m restoring a Zippo Lighter from the Vietnam War Era.
    Its engraved with:
    VIETNAM - BONG SON 68-69
    When this marine dies he will go to heaven because he has spent his time in hell

    The lighter is in a bad condition. It looks like it was stored for many years on a moist place. One rivet is broken and the other one is rusty. The cap of the zippo is loose and the inside of the zippo is full of dirt and rust.

    I hope you liked this restoration, if so, like, comment and subscribe ;)

    Subscribe to my channel:


    Music:
    Sao Meo Orchestral Mix by Doug Maxwell/Zac Zinger

    ___________________________________

    Follow me on Instagram:


    Facebook:


    Patreon:


    ___________________________________

    Acrylic Glass Polishing Compound: **
    Case Polishing Diamond Paste: **
    Case Polishing Wadding: **
    Thermo-Tape: **
    Fiber Glass Pen: **
    UV-Lamp: **
    UV-Glue: **
    Rodico: **
    Multi-Purpose Watch-Repair-Kit: **
    Multitool: **
    Scotch-Brite: **
    Buffing Wheels for Multitool: **
    My Camera: **

    ** Affiliate Links
    Disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support the channel and allows me to continue to make videos like this. Thank you for the support!

  • Lighter Restoration|Emergency LIGHTER Repairing Process|Reuse Lighter Parts|Rare Lighter Restoration

    8:44

    If you like the video then you hit the like & share button and let me know Your valuable feedback and comments in the comments section.

    Please subscribe to my channel and make sure to press the Bell Button to get an instant update.

    Thanks for watching Dream Finder videos. Hope you enjoyed watching my video.

    SUBSCRIBE FOR MORE HERE:

    Facebook Page:
    #GASligherRepair #Lighter_GUN #GAS #BrokenLIGHTER

  • I Restored this Waffle Maker - Im Making a Waffle for You!

    15:47

    Hello my lovely Subscribers! In this video you will see how i restored this Rusty Waffle maker machine.
    This Restoration took me 1 week.
    I bought this machine on ebay for $10.
    Thank you for Watching!

    ????????????????????????????????????????????????????????????
    My Ebay listing -
    ☝️☝️☝️☝️☝️☝️☝️☝️☝️☝️☝️☝️☝️☝️☝️

    ????????????????????????????????????????????????????????????
    More cool videos to watch!
    GIGANTIC Lighter Restoration - World Largest Lighter -
    Halberd AXE Restoration - With Epoxy Handle -
    Iconic Bread Guillotine RAADVAD - Restoration -
    $5 Broken SPACE INVADER Console Restoration and Testing -
    - I Turned this Knife in to a Piece of Art (24K GOLD) - With EPOXY Restoration -
    - $5 Broken SPACE INVADER Console Restoration and Testing -
    - Broken Level Restoration - With Epoxy Resin -
    - $1 Vintage Car Horn - NOT WORTH RESTORING - ASMR Restoration -
    - Antique Rusty Saw Epoxy Handle Restoration -



    If you want to help me create more cool videos you can support me on Patreon or Paypall

    Instagram
    PayPall
    Patreon
    Facebook

  • Zippo lighter restoration

    18:58

    Zippo lighter restoration Today I am restoring a relatively new lighter I mirror polish the lighter and engrave my channel logo on it
    This Zippo lighter is not very old. And maybe this Zippo is not original
    It was brought to me by a friend of mine who is engaged in metal search
    He said that he found her in a field where a sunflower grew


    RESTORATION PROCESS
    I always start with WD40 for rust removal This Zippo lighter inner case stuck to the bottom of the Zippo case. It was very difficult for me to separate these two parts from each other.

    In this video, I will also describe how to change the wick, pour liquid and flint onto the Zippo lighter.
    Please subscribe if you want to see cooler upcoming restoration projects ???? AND DON'T FORGET TO WATCH THE VIDEO AS I DID The Zippo spinning stand

    Music: Free audio library from YouTube.
    Thanks for watching my recovery video. See you soon and be safe.
    Regards
    My Instagram
    zippo in lemon

  • Handmade, completely resurrect the water to the water, the waste zippo!

    10:30

    Related Videos:
    3 Ways to Make Lighter at Home (10:34) ( 3637)
    Restoration of American ZIPPO lighters left in Vietnam in 1966 (15:06) ( 212666)
    Zippo Lighter Mod For Fuel Longevity And Waterproofing (3:27) ( 93899)
    Can you freeze a lighter, and still have it work? (6:13) ( 1242)
    Zippo Lighter Restoration, Harley Davidson edition gold plated (12:06) ( 30753976)
    Zippo Lighter Restoration, Vietnam War MEDIC Repair - Ba Ria 72-73 (13:40) ( 36746673)
    How the Zippo lighter is made. (5:28) ( 18758)
    3 Zippo Lighters Insert You Didn't Know Existed (4:35) ( 339655)
    Children's Church 4.26.2020 (18:22) ( 21)
    HOW IT WORKS | Bicycle helmet, Zippo lighter, Hugo Boss suits | Episode 21 | Free Documentary (23:16) ( 380925)
    Restoring Worlds Smallest Lighter - Vintage Lighter Restoration & Repair (18:35) ( 1274924)
    Restoration super old ZIPPO lighters | Restore 40 year old lighters (17:04) ( 394664)
    Pros and Cons of Zippo Lighters (15:13) ( 170233)
    Zippo Lighter Museum Bradford PA (7:11) ( 2028)
    Rusty Water Filter Restoration (14:23) ( 442668)
    DIY How to Refill a Zippo Lighter (5:46) ( 104)
    How to Refill a Lighter - Easy Way (1:10) ( 438722)
    Zippo Lighter Repair Service: An Excellent Experience (8:07) ( 53836)
    Zippo : A Beginner's Guide (17:40) ( 204955)
    Art Vlog #14 How to make Custom Lighters (17:15) ( 12209)

  • Zippo Lighter Restoration, Vietnam War MEDIC Repair - Phu Rieng 68-69

    12:59

    Zippo Lighter Restoration, Vietnam War MEDIC Repair - Phu Rieng 68-69
    Welcome to World Restoration
    Zippo Restoration
    Today I will be rehabilitating something quite special. It was a lighter I collected from the Vietnam War. Exciting!!! It is imprinted with the history of the Vietnam war Please watch all the videos to see how great it is !!!
    My mission is to restore all the old things, rust, antiques and lots of things worth doing:-)
    And of course I really love to do that:))
    I will share a new restoration 2 times per month, So please subscribe to my channel to make sure you don't miss anything.
    Thanks for all your support and watching, I really appreciate it
    Best regards, ^-^

  • Very Rare Musical Lighter Restoration...Japanese 1960s!

    12:40

    I restore a very rare musical lighter. This vintage Aria lighter comes from Japan! To fix it I had to use a lot of rust removal, thank you PB Blaster, and a whole lot of polish. I pulled out my small hand tools to grab all the little springs and screws. I couldn't believe how many little screws it had.

    Watch Next:
    Vintage Rusty Oil Lamp...A Full Restoration


    Rusty Old Hand Cranked Winch... Restoration Miracle


    Rusty Animal Trap Restoration


    Make sure to Subscribe and hit that Bell Notification to see the next Lost & Restored video!

    Subscribe:

    We love restoring vintage odds and ends. What antique do you want to see Restored?

    #lostandrestore

  • Large Lighter restoration with 24 Karat gold plating

    18:58

    The first 1,000 people to use this link will get a 1 month free trial of Skillshare: ---- In this episode I will restore this Large lighter made in occupied Japan by Reliance. The lighter is very oxidized and in need of a restoration. I also thought it looked worthy of gold plating so I wanted to practice that skjill on it. I used laser cleaner loaned to me by W2M to clean up the dirty and oxidized surfaces. You can find more about their lasers from here:

    After cleaning the parts were polished and then decreased with acetone. This will allow me to get nice shiny plating on the parts. I used an electroless nickel plating method. I prefer it over electroplating as it usually gives better results and plated parts evenly on the inside as well. electroplating can have issues were plating is much thicker is some areas and some areas are hard to plate because current doesn't flow through all the areas of the metal in the same way. But in the end both methods have their own advantages. If you are a beginner in metal plating I recommend checking out my electroplating tutorial. Electroplatin is by far the easiest method fo r a beginner. Link to the tutorial:

    Once the parts were nickel plated I gold plated it with electroplating method called brush plating were you just rub the electrolyte on the surface of the item and gold will appear on the surface.

    I also needed to make a new gasket to replace the old one. I just took thick gasket paper and used hole punches to make a ring of the correct size.

    I hope you enjoy the video as much as I enjoyed making it. Thanks for watching!

    The following links are affiliate links. By clicking them you are directed to a amazon (or other) product page. If you purchase that or any other product I will get a small fee but you will not pay any extra. This is an easy way to support this channel and allow me to keep making these videos Thank you for watching and reading!
    ---------------------------------------------------------------------
    Patreon:
    T-Shirts:
    Instagram:

    Laser cleaner:

    Some of my tools:
    Gold plating kit:
    Acetone:
    Black gloves:
    Hollow punch set:

    My main camera:
    Main lens:

    ---------------------------------------------------------------------
    SUBSCRIBE ▶▶▶
    ---------------------------------------------------------------------
    Restoration playlist▶
    ---------------------------------------------------------------------

    #restoration
    #repair
    #lighter
    #ASMR

  • Restoration of 80’s lighter #restoration #lighter

    42

    Make sure to enable ALL push notifications! ????
    Make your day happier with our videos!
    Os melhores vídeos da internet!

    #shorts#shortsyoutube#shortsdobrasil#actioncomedy #comedy

  • GIGANTIC Lighter Restoration World Largest Lighter 2020

    4:08

    GIGANTIC Lighter Restoration World Largest Lighter

    About This Video-
    In this video of today you will see how to fix rusty lighter in photoshop.

    ► Subscribe to PS Learn+ on YouTube:
    ► Follow PS Learn+ on Twitter:
    ► Follow PS Learn+ on Facebook:

    Our Some Other Videos-

    EGG Earring :
    Damage Car Retouching :
    Restoration Old Watch :
    Earring Retouching :
    Ring Retouching :
    PUBG Level 3 Helmet :
    Shoe House :
    3D Metal Logo :

    Don't forget to - LIKE ???? | SHARE ???? | COMMENT ???? | SUBSCRIBE

    #PSLearn #Photoshop #speedart #restoration

    ~~~~~~~~~~~~~~~~~~~
    Thanks for watching.
    Any comments are welcome!
    ~~~~~~~~~~~~~~~~~~~


    Thank You So Much..!!

  • One of the most recognizable sounds ever - Zippo Click #ASMR #Shorts

    14

    Gold Dust Zippo Lighter - #Shorts #ASMR #Cigar #Smoking #Chilling

  • Rare Vintage Lighter Restoration - Clinton Squeeze Lighter

    18:26

    I will restore this awesome Clinton squeeze lighter. There is some rust and damage from pitting but the mechanism works. Also the plating on the lighter is in need of a restoration. I really like this type of mechanical lighters because it’s always fun to take look and see what’s inside.
    The restoration was quite straight forward. I had no issues with the disassembly, other than the fact that some parts fell out and I didn’t see where they came from. Luckily it didn’t take too long to figure out how to put it back together.
    I used rust remover to get rid of the rust. It is very simple solution when there are a lot of small pieces and it is not abrasive. I also like to use rust remover because I often get the disassembly filmed quite late. I can get the part to rust remover fast and then leave them there overnight and continue the next day.
    After rust was removed I sanded all the pitting from the parts. This took many hours I had to be very careful with the largest shell part because there was this pattern and I didn’t want to ruin it by sanding.
    After sanding I first copper plated the parts and then nickel plated them over the copper. The copper will increase the durability of the plating. Here’s my nickel plating tutorial, copper plating works with the same principles.
    Video where I made the ignot:

    The other parts were pretty much ready to be polished and then nickel plated from the rust remover. Here is my nickel plating tutorial for more information on the process:

    A free way to support my channel is access amazon/ebay to do your regular shopping through these links. I will get a small fee from each product bought on amazon after clicking these links, whether it was the linked product or a different one.

    ---------------------------------------------------------------------
    Patreon:
    T-Shirts:
    Instagram:

    Tools used in this video :
    NICKEL ANODE:
    NICKEL PLATING SOLUTION:
    RUST REMOVER:
    ZIPPO FLINT:


    Other tools:
    ROTARY TOOL:
    PRESS FOR ROTARY TOOL:
    2-AXIS TABLE FOR THE PRESS
    POLISHING KIT:
    CORDLESS DRILL:
    CHUCK NORRIS’ TOOTHBRUSH:

    MY FILMING GEAR:
    MAIN CAMERA:
    MAIN TRIPOD:
    MICROPHONE:
    VIDEO LIGHTS:
    MAIN LENS:
    CINEMATIC LENS:
    WIDE ANGLE LENS:
    GOPRO:
    ---------------------------------------------------------------------
    SUBSCRIBE ▶▶▶
    ---------------------------------------------------------------------
    Restoration playlist▶
    ---------------------------------------------------------------------

  • Gigantic Hammer Restoration - Sledge-O-Matic

    18:11

    This is my Gigantic Hammer Restoration.
    This hammer was found at flea market, was 25 euro.
    This restoration took me one week.
    If you like it please Subscribe!


    Subscribe to my new Cooking channel : cooking with tysy -

    Follow me on Instagram

    For videos in advance Become my Patreon on

    DO YOU WANT STICKERS?
    Subscribe to my others channels Here / TysyTube Unboxing
    TysyTube 2.0

  • Restoration Abandoned Lighter - Brought Back to Life

    12:45

  • Lighter Restoration - 100 Year Old Lighter

    2:53

    Fortunately, the lighter found in the trash was not thrown away This time I made a profit!
    -----------------------------------------------------------------------------
    #lighter #trash #DIYMASTER
    -----------------------------------------------------------------------------
    SUBSCRIBE -
    -----------------------------------------------------------------------------

    WARNING! Dear friends! My videos are provided only for entertainment and watching purposes only. So do not try to repeat everything you see in my videos. No one is liable for any loss or damage caused by your reliance on information contained in my videos. Entertain yourself but always be safe and take care of your health.

  • Lighter Asmr in HQ #shorts

    12

    Credit : @ the_object

  • WHAT IS THIS / OPTICAL ILLUSION #SHORTS

    50

    Description

    Amazing Optical Illusions

    Mr. Mind Blow3,024,308 views29 Sept 2018

    NEW VIDEO ????➡️ ???? Submit videos to: MindblowingSubmissions@gmail.com ➡️ Follow me on Instagram: Copyright/Monetization: All videos and products shown on the Mr.Mind Blow Channel were submitted by their original creator. Mr Mind Blow has the permission to use, showcase and monetize these videos. His videos do serve an educational purpose by showing the greatness of science and the human brain. Many school classes watch his Amazing Science Toys/Gadgets series and became more interested in the topic of science and physics. Therefore the content on the Mr. Mind Blow channel qualifies for the YouTube Monetization Program. Mr. Mind Blow is bringing you Amazing Optical Illusions part 1! Sit back and relax. Enjoy 10 minutes of oddly satisfying Optical Illusions featuring Ames Room, amazing artwork by Patrick Hughes and cool gadgets.

    Amazing Optical Illusions

    3M views · 2 years ago

    30K

    2.2K

    Share

    Save

    Report



    Mr. Mind Blow

    443K subscribers

    SUBSCRIBE

    Comments • 1,295

    Up next



    9:12



    Casting Brass Fidget Spinner from Bullet Shells

    PressTube•27M views



    10:22



    दिमाग घुमा देने वाली चीज़े || 10 Optical Illusions of Mind boggling

    Tech Borban•749K views



    11:36



    BUBBLE Blast from WonderLab STEM KIT, Easy Science Experiments

    Peephole View ToysNew7.9K views



    8:36



    OMG Got Mini Bluetooth Speaker , Earphone & Torch and Money Inside Good Luck Snacks ! Free Gift

    Jhatpat Review•692K views



    19:37



    Jethalal क्यों बना Helmet वाला गुंडा? | तारक मेहता का उल्टा चश्मा | Viewer's Choice

    Sony SAB•2.7M views



    LIVE



    कृष्ण भजन स्पेशल : एक ऐसा भजन जिसे सुनकर दिल खुश हो जाएगा | Krishan Bhajan 2021

    Live Radha Krishan Bhakti•142 watching



    20:33



    Scrapyard Motor Melt Down - Zinc Copper Aluminum - Trash To Treasure - ASMR Metal Melting BigStackD

    bigstackD Casting•3.4M views



    18:18



    Cleaver Restoration [Black Cleaver With Ebony Handle]

    Forgotten Shine Restoration•16M views



    8:25



    भई वाह क्या मशीन है Amazing Modern Automatic Cow Farming Technology, Cleaning and Milking Machines

    Machine India•26M views



    8:05



    क्यों जीवित नहीं बचता कैलाश पर्वत पर चढाई करने वाला इंसान | BIGGEST MYSTERIES OF KAILASH PARVAT

    Rahasya Discovery•4.3M views



    8:36



    Episode 37 - Khajana Chor | Hindi Paheliyan | Hindi Riddle | Detective Mehul paheli

    Detective Mehul - मेहुल जासूस•5.3M views



    18:47



    World’s Largest Lighter Restoration ASMR

    TysyTube Restoration•22M views



    17:09



    Bulk Key Meltdown - Big Brass Bar & Coin Casting - ASMR Metal Melting -BigStackD -Fallout Uncharted

    bigstackD Casting•8.1M views

  • most amzing lighter collection goes viral in china - help me 1000 subscribe - vtech #shorts

    16

    most amzing lighter collection goes viral in china
    ????Have fun watching the video.????
    ????Thank you for watching the video ????????????
    ????Subscribe to our channel to support us

    lighter
    lighters
    lighter restoration
    lighter collection
    ksi lighter
    trench lighter
    bic lighter collection
    old lighter
    india lighter
    most amazing lighters collection
    a zippo lighter
    world war 1 lighter
    zippo lighter tricks
    ksi nathan dawe lighter
    nathan dawe lighter
    lighter restoration videos

  • most amzing lighter collection goes viral in china - help me 1000 subscribe - vtech #shorts

    45

    most amzing lighter collection goes viral in china - help me 1000 subscribe- thank you - vtech #shorts
    ????Have fun watching the video.????
    ????Thank you for watching the video ????????????
    ????Subscribe to our channel to support us

    lighter
    lighters
    lighter restoration
    lighter collection
    ksi lighter
    trench lighter
    bic lighter collection
    old lighter
    india lighter
    most amazing lighters collection
    a zippo lighter
    world war 1 lighter
    zippo lighter tricks
    ksi nathan dawe lighter
    nathan dawe lighter
    lighter restoration videos

  • ASMR old spark lighter RESTORATION

    13:37

    In this video you will find how i restore an old rusty lighter.
    Please subscribe my channel for more interesting videos.

  • Vintage Lighter repair thoughts

    25:44

    Keep in mind that when you listen to this video that Collecting lighters never comes to mind when I make a choice or opinion on what I feel are excellent vintage lighters for those who want a quality working pocket lighter to use. I focus primarily on lighters that I have repaired so far up until this video. Lighters that will stand the test of time if they are taken care of while using the purist butane available to keep the system clean.Lighters that will last for year's and even decades before service is required. Keep in mind my limited repair knowledge is based on what I like , and why I chose some lighters over other more expensive and even name brand vintage lighters that collectors like to collect. I feel that Performance, durability and simplicity is a must for someone with a limited budget. Being able to repair your lighter for yourself will also help keep your lighter in top shape without the unnecessary expenditure of your hard earned funds!

  • Lighter ????????#shorts

    10

    Lighter ????????#shorts#gadgets #technology

  • Cegret ligter lighter lighter collection lighters

    37


    #mjGadgets#lighter#lighter collection
    lighter restoration lighters zippo lighter restoration lighter repair vintage lighter vintage lighter restoration old lighter repairing lighter antique lighter brass lighter old lighter restoration lighter restoration videos rusty restoration#antique restoration#restoration project#tool restoration#vintage restoration#perfect restoration#zippo restoration#asmr restoration#2022#2021a

  • Antique Rusty Soviet heavy machine gun Bullet Case Restoration | ASMR Restoration

    4:37

    Rusty Soviet heavy machine gun Bullet Case Restoration
    This Video is Just for Satisfaction, Education and Fun. So, Enjoy the Video !!

    If you want to help me create more cool videos you can support me on PATREON: ???? OR

    Subscribe My channel ????

    Follow me on Instagram

    My Facebook Page:

    ???? DISCLAIMER: This Channel DOES NOT PROMOTE Or Encourage Any illegal Activities , All Contents Provided By This Channel is Meant For EDUCATIONAL PURPOSE Only..

    ???? Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use

Shares

x

Check Also

Menu